|
|
| ··Product Introduction·· |
|
|
|
| SDI/ASI自动切换器
SD-401 SDI/ASI Change Over: |
 |
|
 |
| ◆ Features: |
· 4x1 SDI/ASI changeover, Manual mode availble.
· Non-broadcast data rates also supported nonreclocked
· Auto changeover on signal loss or reclock error
· Configurable change back logic
· Integrated DA with 4 re-clocked SDI outputs |
| ◆ SD-401 Specifications: |
| SDI INPUT |
| 1 |
Number of inputs: |
2 - 4 |
| 2 |
Standard: |
SMPTE 259M |
| 3 |
Data Rate: |
1Mbps - 540Mbps |
| 4 |
Connector: |
75 ohm BNC female |
| 5 |
Impedance: |
75 ohm nominal |
| 6 |
Return Loss: |
> 15dB (5MHz-270Mhz) |
| 7 |
Cable Equalization: |
0 to 300m typical Belden 8281A |
| SDI OUTPUT |
| 1 |
Number of outputs: |
4 |
| 2 |
Connector: |
75 ohm BNC female |
| 3 |
Signal Level: |
800mVp-p ±10% |
| 4 |
Signal Polarity: |
2 outputs non-inverting,
2 outputs inverting |
| 5 |
Impedance: |
75 ohm nominal |
| 6 |
Return Loss:
|
> 15dB (5MHz-270Mhz) |
| Other |
| 1 |
Re-clocking rates: |
143, 177, 270, 360, 540Mbps |
| 2 |
Standard support: |
SMPTE 259M, 305.2M, 344M, 310M DVB- ASI
EN50083-9 AES-3id |
| 3 |
Switch Mode: |
Auto / Manual / Bypass |
| 4 |
Input equalizer |
Support |
| 5 |
CONTROL INTERFACES |
RS485 (optional) |
| Chasiss |
| 1 |
AC power |
220 VAC |
| 2 |
Dimensions |
483 x 44 x 178 mm(19", 1RU) |
|
|
| 【 Download 】 |
|
| * Specification subject to change without notice * |
|
